| 1. | The average displacement can qualitatively explain the stepping movement of kinesin in experiment
粒子平均位移定性解释了驱动蛋白的梯跳实验现象。 |
| 2. | Usually , engines of greater displacement can consume more air and fuel and make more power
通常，更大的替代的发动机能消耗更多的空气和燃料并且做更多的能量。 |
| 3. | The screw thread shading network is a good example of how displacement can be driven by a mathematical expression rather than a conventional texture map
螺纹材质网络是一个好例子，它证明了如何通过一个数学表达式来驱动置换，它强于一个方便的纹理贴图。 |
| 4. | In this paper , the actual displacement of the structure foundation under blasting vibration stimulation is calculated at first , then , the response of structure by the displacement can be worked out
文中的求解方法是先通过计算结构基础在爆破震动激励下的实际位移，再通过基础的实际位移来求解结构的响应。 |
| 5. | 3 , the displacement can be deflected to prevent damage caused by subsidence of connected brackets and equipment base . it can adapt itself to the centrifugal different of pipeline installation to provide convenience to installation and maintenance
3能偏转位移，可防止连接的支架或设备基础下沉引起的损害，能适应管道安装的偏心误差，方便安装与维修 |
| 6. | Based on the idea of the measured displacement can be divided into elastic and plastic parts , elastic parameters can back analyzed by the elastic displacement , which is the measured instant after blasting excavation . the strength parameter can be got by plastic deformation , which is the measured during the period of construction loop without blasting excavation . lastly , depending on fenner formula , a new and valid evaluating criterion for tunnel stability is presented and the effect of deformation modulus , cohesion , internal friction angle and overburden can be considered
以解析理论为基础提出一种实用而简便的圆形洞室弹性反分析方法，且将其应用推广到其它洞型、分步位移等不同情况；提出一种围岩强度参数反演方法，并对其可靠性进行了初步研究； ( 4 )依据芬纳公式提出了能够考虑围岩变形模量、强度参数、埋深等主要因素的、新的、有效的围岩稳定性评判方法。 |
| 7. | The whole building can be equivalent to a cantilever bar , and the structural total displacements can be divided into parallel displacement and rotational displacement based on the harmonize condition of displacement , and the parallel shear and the rotational shear of the elements can be accordingly obtained by selecting the renegade body from top to bottom in turn
根据位移协调条件，将结构的位移分解成平动与转动成分，得到相应的结构平动时构件所承担的剪力与结构转动时构件所承担的剪力，再根据力的平衡条件，推导出双向地震作用下考虑构件抗扭刚度时结构的线弹性扭转角，并对构件的剪力及变形进行了修正。 |
| 8. | Several mode of the subdividing drive are integrated in one system . so the control become multiplex . the displacement can be divided to whole step part and microstep part . microstep part is used to satisfy the precision of position , while whole step part is used to satisfy the speed of position
实现多重细分和变细分调速，提高了细分驱动的灵活性和可选择性；根据整步位移无控制误差，将点位行程拆分为整步位移部分和满足定位精度的微步距位移部分，分别以不同的细分数运行同时满足点位控制的速度与精度要求。 |
